דילוג לתוכן
Articles and Knowledge Centre / Management and Operations

Backup Monitoring: What Should Be Checked Every Day?

What do you check in the backup report, how do you identify anomalies and who handles them? A practical guide to daily monitoring, alerts, capacity, and recovery tests.

17.09.2026 · 10-minute read
Illustration on backup monitoring: what should be checked daily?

The backup runs at night, and in the morning there is a report. The important question is what to do with it. Good monitoring checks that the right information is saved on time, that the copies are accessible, and that there is a practical way to restore. You don’t need to open an investigation every morning, but you do need a clear routine: who checks, what to look for, and how to handle an anomaly before it becomes a surprise during recovery.

What do we check today?

  • The Last Copy and Exceptions
  • Volume, Time, and Access
  • Who Handles It and How to Verify
Key principles at a glance

This guide is suitable for IT teams and service providers managing local, cloud, or hybrid backups. Adjust the frequency and alert thresholds for your systems. A business system that constantly changes requires different attention than an archive that rarely changes.

Check anomalies first: what failed and what didn’t run?

Start with tasks that failed, stopped, or did not run on schedule. It is also important to look for missing tasks: a system that did not send a report could be turned off, disconnected, or incorrectly configured. Sometimes the most important report is the one that never arrived.

For every critical system, check when the last valid recovery point was created and what has changed since. A success message from yesterday is not enough if the system is supposed to be backed up hourly. The age of the copy should be compared to the Recovery Point Objective (RPO) and the established policy.

  1. Ensure the task was executed: Did it run at the scheduled time, or was the computer unavailable?
  2. Read the result: Success, warning, failure, and cancellation are not the same state. Also check warnings, especially if files or application components were skipped.
  3. Check the latest copy: Is there a restore point that matches the program, and not just a task record?
  4. Compare against the business need: Does the possible data loss window still comply with the RPO? Also check if an offsite copy has been completed.
  5. Document what was done: Leave a record that allows identifying whether this is a recurring fault or a one-time event.

Track volume and times: what changed since yesterday?

Not every change is a fault. New files, software updates, or network load can change the backup size and runtime. The goal is to identify deviations from normal behavior and determine what explains them. The system does not have moods, but its graph can certainly have strange days.

What to check? Which deviation requires investigation? What should be checked first?
Age of the restore point The latest copy is older than planned Missing tasks, failures, computer availability, and transfer completion
Backup duration The run is prolonged or exceeds the backup window Load on the computer, network, and storage; changes in data volume
The volume of data transferred Sharp increase or unexpected decrease Type of execution, file scope, and changes made in the system
Free space The destination is approaching capacity limit Growth rate, retention policy, and lock periods
Warnings and skips Important files or components were not included Permissions, open files, application services, and task settings
The additional copy Local backup succeeded, but the additional copy was not completed Communication, access to destination, task queue, and free space

Compare similar runs. The first full backup is not expected to look like a small incremental backup. Upgrade, method change, or adding data can explain a large change. Conversely, a very small backup can also indicate a folder was not included, incorrect filtering, or lack of access, not necessarily successful savings.

A sharp change in the number of modified files can justify a security check, but by itself it is not proof of ransomware. Check the context, the logs, and the security alerts before deciding what happened.

Turn monitoring into a habit: a daily check routine

A short, repeated process is better than an impressive one done once. Appoint someone responsible for daily monitoring and a substitute in case of absence. If managing multiple clients, arrange the check according to criticality, age of the latest backup, and unresolved anomalies, not just by the order of names in the console.

  • Review tasks that failed, were canceled, or ended with a warning.
  • Check the age of restore points for critical systems and the status of additional copies.
  • Check available space, run times, and unusual changes in volume.
  • Open a handling task for each significant anomaly, with an accountable owner and a follow-up date.
  • Check what remains open from yesterday, and what requires escalation or client update.

A central console can make the work easier, but it must be ensured that it displays all the systems included in the service. A new server not defined in it will not be able to complain that it has no backup. Match the list of assets to the list of tasks.

Set alerts that can be acted upon

An alert is useful when it reaches the right person and explains what needs to be checked. Hundreds of messages that return without being addressed can turn into noise. On the other hand, turning off the alert without resolving the issue only silences the messenger.

There is no single threshold suitable for every business. Set thresholds according to RPO, backup window, storage growth rate, and system importance. You can start with the usual behavior of each task and adjust the thresholds after monitoring, while ensuring real failures are detected.

  • Content: The name of the system or client, the task, the event time, the result, and the last known restore point.
  • Address: A person or team responsible for handling it, not a mailbox that no one checks.
  • Escalation: Who receives the event if there is no acknowledgment or handling within the specified time?
  • Backup for monitoring itself: How do you know the system is still sending reports? Also check for states of no reporting.

Occasionally check the alert path using a controlled test event or product test capability. Make sure the message is received and that the recipient knows what to do. There is no need to cause a production server failure to discover that the address on the list no longer exists.

Handle the issue according to risk, not just the color in the report

Not every failure is urgent to the same degree. A task that failed once, when there is a sufficient, up-to-date copy, is different from a critical system that has no appropriate restore point. Damage to access to a target or an attempt to delete backups can also change the priority order.

  1. Understand the impact: Which information is at risk, what is the last good copy, and are the targets still in place?
  2. Identify the cause: Read the failure message and the logs. Check for changes in permissions, communication, capacity, and settings.
  3. Handle in a controlled manner: Match the fix to the cause. Do not change retention, security, or broad permissions just to make the task turn green.
  4. Verify: Check that the appropriate run completed, that a restore point was created, and that the additional copy was also completed according to the plan.
  5. Close and document: Record the cause, action, and verification result. In case of recurrent failure, look for the root cause, not just the button for a rerun.

Check the target, permissions, and retention policy

A backup can fail because of the target, and it can also succeed today and stop tomorrow if space is about to run out. Check capacity and growth forecasts, not just the available space at the time of inspection. If the copies are locked, it may not be possible to free them before the end of the retention period.

Make sure the retention policy still allows the required recovery scenarios. Check old restore points as needed, locking status when using Immutable, and offsite copy completion. Locking protects against certain actions; it does not indicate that the backup is clean or complete.

Also monitor changes in access details, permissions, and service accounts. Password changes, account cancellation, or infrastructure updates can affect backup and recovery. Keep encryption keys and access details in protected means, with authorized access available even during an incident. Do not attach passwords to the incident report.

Include recovery tests: let the copy prove itself

Daily monitoring checks the routine. A restore test checks whether what was saved can be used. Set up a test plan according to risk: a single file, database, server, or an entire service, including its dependencies. Perform the tests in a separate and suitable environment, without affecting production.

  • Open files and check the content, not just their existence.
  • In the system or application, also check data, permissions, services, and dependencies.
  • Measure recovery time and compare it to the RTO. Also check to which point of data you have returned relative to the RPO.
  • Document the tested copy, the environment, the actions, and the results.
  • Practice again after significant changes in the infrastructure or backup method.

A successful test is good evidence for the scenario and the tested copy. It is not a guarantee that every future recovery will succeed in all circumstances. This operational peace of mind requires maintenance, just like the backup itself.

For further reading: How do you check that the backup is truly restorable? andCommon backup failures and how to handle them.

Add periodic review to the daily picture

The daily check deals with what is happening now. A broader review examines whether the plan is still suitable for the business. A new system, moving to the cloud, or changes in the scope of information can alter needs even when all existing tasks are successful.

Example control routine What is examined?
Every working day, or at a frequency appropriate to risk Failures, lack of reporting, age of the last copy, warnings, and open exceptions
Example weekly review Recurring faults, trends in time and volume, capacity, and adherence to defined handling
Example monthly review Asset coverage, retention, access, protected copies, test results, and target updates
After a significant change Compliance of settings, creation of a restore point, and verifying that the system is still recoverable

These are starting points for planning, not a mandatory schedule for every environment. A critical system may require continuous monitoring or handling outside business hours. Set the frequency, coverage hours, and escalation according to business needs and the service agreement.

Document so that someone else can continue

A good treatment record answers several questions: what happened, when it started, who is responsible, what the risk is, what was done, and how the solution was verified. Add a follow-up date if the event is still open, and link to previous incidents when there is a recurring pattern.

Such documentation allows for shift handover, updating the client, and seeing which problems require changes in the plan. A client report should also explain gaps and remaining limitations, not just how many tasks were completed. 'Everything is green' is nice to read; 'these are the tests and these are the exceptions that were handled' provides a better basis for trust.

Before closing the daily control, ensure there are copies at the appropriate times, that significant deviations have an owner, and that follow-up has not stopped. This way, monitoring quickly becomes a habit of reading a report to the ability to detect problems and address them before the business needs the backup.

Continue reading